High Resolution Payloads
DJI ZENMUSE P1
YOUR GO-TO TOOL FOR AERIAL PHOTOGRAMMETRY
Unlock unmatched efficiency and accuracy through flexible full-frame photogrammetry with the DJI Zenmuse P1
Efficiency
The Zenmuse P1 boasts a full-frame, low-noise, high-sensitivity sensor that enables it to effortlessly capture detailed images every 0.7 seconds while in flight. This rapid imaging cadence ensures that even the smallest details are comprehensively recorded, creating a clear visual archive of the surveyed area. The P1's exceptional performance isn't confined solely to its speed; its scope is equally impressive. With the ability to encompass a sprawling 1.1 square miles (3 km2) in a single mission, the P1 redefines efficiency, offering surveyors and professionals the capacity to collect data on a grand scale.
Accuracy
Equipped with a global mechanical shutter and the all-new TimeSync 2.0 system, which synchronizes time across modules at the microsecond level, the Zenmuse P1 lets users capture centimeter-accurate data combined with the real-time position and orientation compensation technology.
Versatility
With the Zenmuse P1, the creation of 2D, 3D, and detailed models becomes effortless thanks to the integration of a dynamic 3-axis gimbal, which accommodates a range of 24/35/50mm lenses and is further enhanced by the Smart Oblique Capture feature. This combination of cutting-edge technology allows you to create a diverse spectrum of models that caters to your specific needs and objectives.
Smart Oblique Capture
Cover 2.8 square miles (7.5 km2) in a single workday with the P1. Elevate the efficiency of your oblique photography mission using Smart Oblique Capture, where the gimbal automatically rotates to take photos at the different angles needed. Only photos essential to the reconstruction will be taken at the edge of the flight area, increasing the efficiency of post processing by 20%.
Fieldwork Report
Verify data quality immediately post-flight by checking the position data and number of the images acquired, as well as RTK status and positioning accuracy.
A Mission Mode for Any Scenario
Key Features
Camera
Sensor size: (Still): 35.9×24 mm (Full frame)
Sensor size: (Max video recording area): 34×19 mm
Effective Pixels: 45MP
Supported Lenses
- DJI DL 24mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 84°
- DJI DL 35mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 63.5°
- DJI DL 50mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 46.8°
Video
Video Format: MP4,MOV
Video Resolution:
16:9 (1920×1080)
16:9 (3840×2160)* (*Only 35mm lens supported)
Frame Rate: 60fps
Phase one P3
UNMATCHED INSPECTION PRODUCTIVITY AND VERSATILITY
Discover how Phase One P3 is a payload with small details that make a big difference.
Details that Make a Difference
Featuring the cutting-edge medium format Phase One iXM camera, the Phase One P3 sensor surpasses conventional cameras by 1.7 times in size, capturing more details in every frame. Bolstered by iXM cameras' unmatched dynamic range, the P3's versatility shines through a spectrum of lens choices, ranging from 35mm to an impressive 150mm – a record-setting focal length for small UAVs.
Versatile Platform Support
Interface to DJI, Auterion and MAVlink UAVs or use the Phase One integration toolbox for seamless integration with your existing workflows.
Smart Focusing
Incorporating a built-in laser range finder, the P3 guarantees unwavering focus in scenarios characterized by complexity and high contrast.
Wide Lens Range
Offering a selection of 35mm, 80mm, and 150mm lens options, the P3 fulfills your Ground Sample Distance (GSD) needs across varying distances, all the while upholding uncompromising image quality standards.
Medium Format Sensing
Using sensors of 5MP and 100MP, the P3 guarantees expansive coverage, exceptional dynamic range, and minimal GSD.
P3 for DJI M300 – Ready for Flight
The P3 payload, designed for seamless integration with the DJI M300, presents a hassle-free, plug-and-play drone imaging solution. P3 for DJI M300 provides:
- Turnkey integration with the DJI Pilot App
- Increased productivity through an extended lens offering for the iXM inspection camera
- Maximum utilization and uptime of your existing M300 fleet by opening up new application opportunities
P3 for MAVLink Supported Drones – Ready for Integration
The P3 payload for MAVLink supported drones is designed to significantly reduce your time to market by fast-tracking your integration efforts. P3 for MAVLink supported drones provides:
- Full compatibility with your MAVLink inspection drone
- Complete documentation of the open-source software, and electrical and mechanical interface for seamless integration
- Your choice of MAVLink Ground Control Software through the MAVLink Camera Protocol
Get plug-and-play integration with Auterion’s open drone ecosystem
Seamless Workflow - P3 for Auterion
P3 for Auterion is a ready-to-scale solution providing faster expansion and diversification of your drone fleet. The P3 for Auterion delivers unmatched, end-to-end productivity by providing:
- Full support for the Auterion Ecosystem via the SkyNode and Mission Control
- Leverage on smart workflows and communication infrastructure with extended connectivity
- Complete documentation accessible via the Phase One Integrator Portal
Key Features
Sensor: Medium format iXM 50 (8280 x 6208) & 100MP (11664 x 8750)
Environmental Rating: IP53 (iXM only)
Gimbal Stabilization: 3 axis
Laser Range Finder (Effective Range): Approximately 295 feet (90m)
Supported Lens Range: 35*, 80, or 150mm
Camera Control (key features): ISO, shutter speed, exposure, AE, focus distance, AF/MF, LRF range max/min, focus peaking
Camera Metadata (key features): EXIF (incl, IMU & Custom Field), ICC Profile, XMP (incl. GPS) & IPTC
Aperture Range: 1/3 f – stop increments
Exposure Control: 1/3 f – stop increments
Shutter Speed Max (sec): 1/2500